The use of Bricks or Pavers to produce a sidewalk or outdoor patio complements a home in a method that is unmatched. In addition, installing a Brick or Paver walkway does not always need a pro.
The secret to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be installed. In addition, string lines must be strung on each side of the pathway.
Once the location has actually been dug down, 3/4" gravel stone should be laid in and tamped down tightly. The height between the tamped down sand and the stringline must equal the thickness of the brick or paver.
Now that you have a steady base, place a 1" pipeline or ledger board the length of the pathway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will act as your pathway border and aid to maintain the integrity and shape of the pathway.
Once this is done, you can then begin to lay the bricks/pavers. There are lots of patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure check here that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the stability of the walkway.
Undoubtedly bricks/pavers will require to be cut or split when developing the walkway. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the area where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.
After setting up the bricks, construct up the outdoors edges with additional sand, and then shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the cracks. Repeat this process a number of times to ensure the cracks are fully filled. This will finish the interlocking of the bricks and help to eliminate any weed development. Just include lawn seed to the outside edges and you must have a gorgeous entrance to your house within a couple of weeks.
In addition, setting up a Brick or Paver sidewalk does not always need a pro. The secret to installing a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipeline or journal board the length of the walkway on either side of the walkway. These strips will act as your pathway border and aid to keep the stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when constructing the sidewalk.